Makita 18V Brushless 12-Piece 3 X 5.0AH Combo Kit DLX1202TX1

include

• 1 x MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z
• 1 x MAKITA 18V Brushless 1/4" Impact Driver DTD172Z
• 1 x MAKITA 18V Brushless 125mm Slide Switch Angle Grinder Skin DGA504Z
• 1 x MAKITA 18V Brushless SDS+ Rotary Hammer Skin DHR242Z
• 1 x MAKITA 18V brushless 165mm circular saw blade DHS680Z
• 1 x MAKITA 18V Brushless Reciprocating Saw DJR187Z
• 1 x MAKITA 18V Brushless Laminated Trimmer Skin DRT50Z
• 1 x MAKITA 18V Brushless 1/2 Inch Medium Torque Impact Wrench Skin DTW700Z
• 1 x MAKITA 18V 7.5L Brushless Wet/Dry Vacuum Skin DVC750LZX1
• 1 x MAKITA 18V Brushless AWS 82mm Planer DKP181Z
• 1 x MAKITA 18V Brushless Starlock Max Multi-Tool Skin DTM52ZX3
• 1 x Makita 18V LED Flashlight Skin DML808
• 3 x Makita 18V 5.0Ah lithium-ion battery BL1850B-L
• 1 x MAKITA 18V Li-ion Dual Port Fast Battery Charger DC18RD 1969360
• 1 x MAKITA canvas tool bag set LXT418 and LXT423 1999369

Makita 18V brushless electric hammer drill driver leather DHP486Z

The 18V brushless hammer driver drill delivers a maximum tightening torque of 141Nm and a no-load speed of 2,100rpm, combining fast drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio, not only achieving more power but also improving performance in continuous heavy-duty applications.

Not only does this model have improved performance, it is also significantly shorter in length. The length of this model is 178 mm, which is 27 mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.

• Compact design - For improved handling and control, overall length has been reduced by 27mm compared to previous model
• 3 Drilling Modes – Screw Drive Mode (via clutch rotation) for an even and consistent finish when tightening screws. The maximum torque in drilling mode (rotation only) can reach 141Nm. torque. Hammer drilling mode (hammer rotation) is used for drilling holes in masonry with a maximum hole diameter of 16 mm.
• LED Work Light – High brightness dual LED work light with pre-light and post-light functions. Illuminate the work area to improve visibility during application
• High Power Output – This model has been redesigned with a newly designed motor and gear ratio to not only achieve more power but also improve performance in continuous heavy-duty applications.
• 2-speed mechanical transmission – High-speed mode produces 2,100 rpm for fast drilling speeds, while low-speed mode produces high levels of torque for high-load operations.
• All-metal gear construction - allows smooth transmission of power in high-load applications. Highly durable materials ensure this tool has unparalleled durability and will continue to perform for years to come.
• XPT – Extreme Protection Technology protects tools from dust and moisture for increased durability even in the harshest job site conditions

Specification

• maximum. Wood drilling capacity:
  
  • Spiral drill bit: 50mm
  • Self-supplied cutter head: 76mm
  • Hole saw: 152mm
• maximum. Steel drilling capacity: 13mm
• maximum. Masonry drilling capacity: 16mm
• No-load speed:
  
  • High: 0 - 2,100rpm
  • Low: 0 - 550rpm
• Impact rate:
  
  • High: 0 - 31,500ipm
  • Low: 0 - 8,250ipm
• maximum. Peak torque: 141Nm
• maximum. Tightening torque:
  
  • Hard: 130Nm
  • Soft: 65Nm

SEE 18V 无刷 1/4" 冲击起子皮 DTD172Z

• 4-level shock selection plus two T-mode, A-mode and bolt modes
• Press the selection button with one hand anytime, anywhere
• An impressive maximum 180Nm. Tightening torque
• XPT technology enhances dust and moisture resistance
• Ultra-compact design with dual bi-sided LEDs

Makita 18V brushless 125mm sliding switch angle grinder skin DGA504Z

• Backlash detection, anti-restart and soft start
• Automatic torque drive increases torque power through any cut
• Ultimate performance with no-load speed of 8,500rpm
• XPT technology repels dust and moisture
• Electronic current limiter
• Easy-to-hold grip design, rubber anti-slip
• The world’s deepest concrete cutting mobile angle grinder with a depth of 20 mm
• Excellent performance – as powerful as AC models
• Gearbox can be rotated to suit most cutting and grinding applications
• Automatic speed control varies cutting speed based on load conditions for optimal operation
• Even if the machine is plugged in with the lock switch turned on, the anti-restart feature prevents accidental startup and ensures safety

MAKITA 18V Brushless SDS+ Electric Hammer DHR242Z

• 3 operating modes: Hammer only, Rotate only, Rotate and Hammer
• Unique rubber joint dampens battery vibration
• 2.0j impact energy

规格

• Impact rate: 0 - 4,700ipm
• Vibration per minute: 13.5m/s²

SEE 18V 无刷 165mm 圆锯皮 DHS680Z

• Powerful Brushless DC Motor (BLDC)
• Automatic torque drive; automatically increases motor torque according to load conditions
• Magnesium base has 45 and 50 degree bevel cutting capabilities
• Compact, lightweight design
• Rear dust outlet
• Dual LED work light with pre-light function
• LED indicator panel with 3 indicators for: battery fuel gauge, automatic torque drive and overload protection
• Tool rack for hanging from ladders or rafters
• The large locking lever is easy to operate even with gloved hands
• Compatible with 1.5, 3.0, 4.0 and 5.0Ah lithium-ion batteries

规格

• Voltage: 18V
• No-load speed: 5,000rpm
• Bevel ability: 50°
• Blade diameter: 165mm
• Maximum cutting capacity:
• 0°: 57 mm
• 45°：41毫米
• 50°：37毫米
• Weight: 3.3kg
• Length: 350mm

SEE 18V 无刷往复锯皮 DJR187Z

• 32mm travel, wood cutting capacity of 255mm
• Newly designed vertical crank mechanism reduces vibration
• High performance 3,000spm no-load speed
• Rafter hooks are more convenient
• XPT technology repels dust and moisture

Specification

• Stroke length: 32mm
• maximum. Pipe cutting capacity: ø 130mm
• maximum. Wood cutting capacity: 255mm
• Total length: 439mm
• trips per minute
  • High: 0 - 3,000 rpm
  • Low: 0 - 2,300spm
• Voltage 18V

MAKITA 18V Brushless Laminated Trimmer Skin DRT50Z

• Switch with safety lock and variable speed - prevents accidental activation of tool during use or transport, protecting user and workpiece
• Shaft Lock - Easily install and remove trimming bits with a single wrench by pressing down on the shaft lock
• Soft Start - Minimizes starting shock and allows the tool to start smoothly for optimal control
• BL Brushless Motor - Provides more power to the motor while increasing runtime and durability
• Variable Speed ​​Control Knob - By turning the speed knob, the tool's rotation speed can be varied from 10,000 - 30,000rpm
• Aluminum base with precise rack and pinion depth adjustment
• LED work lights improve visibility
• Constant speed control - provides constant speed regardless of load conditions
• Chuck capacity: 6.35mm (1/4")
• Net weight: 2.1kg (with 6.0Ah battery)
• No-load speed: 10,000-30,000rpm
• Total length: 226mm
• The kit includes various optional accessories

Makita 18V Brushless 1/2-Inch Medium Torque Impact Wrench Skin DTW700Z

The 18V brushless impact wrench is designed to meet the needs of manufacturing technicians, machinists and manufacturers. The DTW700 uses an efficient Makita brushless motor to provide powerful torque in a compact design, with a maximum tightening torque of 700Nm and a nut tightening torque of 1,000Nm. The DTW700 features 4 levels of power selection, adding versatility and allowing the user to select the optimal speed and tightening torque for the task at hand. It also features forward and reverse auto-stop functions with 6 modes optimized for fastening applications, giving users more control during use.

• Compact design with a length of only 170 mm for comfortable operation
• 4 levels of power selection for optimal speed and tightening torque
• Maximum nut tightening torque is 1,000Nm, maximum 700Nm. fasten
• Unique rubber joint dampens battery terminal vibration
• Forward and reverse automatic stop function, optimized for fastening applications

规格

• maximum. Standard bolt capacity: M10-M24
• maximum. Capacity high-strength bolts: M10-M16
• No-load speed:
• Maximum: 0-2,200rpm
• Hard: 0-1,900rpm
• 转速：0-1,200rpm
• Soft: 0-500rpm
• Impact rate:
• Maximum: 0-2,700ipm
• Hard: 0-2,400ipm
• 具有：0-1,700ipm
• Soft: 0-1,000ipm
• maximum. Tightening torque:
• Maximum: 700 Nm
• Hard: 320Nm
• 具有：200Nm
• Soft: 150Nm
• Nut tightening torque: 1,000Nm
• Drive handle: 12.7mm square

MAKITA 18V 7.5L Brushless Wet/Dry Vacuum Skin DVC750LZX1

Designed to meet the needs of industries requiring portable dust collection in wet and dry applications. Developing a lightweight dust collector for power tools and wet or dry detail cleaning

• 2-stage suction control - Optimized power and durability, offering 55W or 20W suction
• HEPA filter provides high filtration rate of 99.97%
• Brushless Motor Highly efficient brushless motor provides up to 70 minutes of run time
• Flexible 2.5m hose folds up and comes with on-board storage for added convenience
• Washable filters are ideal for use in wet or dry applications. Battery fuel gauge enables you to check battery life without opening the hatch or removing the battery
• Standard accessory wide nozzle and sash nozzle for detailed cleaning conveniently stored on board

Specification

• Voltage: 18V
• Maximum sealing suction power: 6.7kPa
• Maximum air volume: 1.8 cubic meters/minute
• Water tank capacity: 7.5L
• Standard hose: 32mm x 2.5m
• Weight (including battery): 4.6kg

Makita 18V brushless AWS 82mm peeler DKP181Z

The DKP181Z delivers heavy-duty cutting performance with a high-power brushless motor, allowing for huge cuts up to 3mm. Cutting depth. Combined with automatic torque drive technology, the planer automatically adjusts speed and torque based on load conditions for optimal cutting. Also equipped with an electric brake and feet on the base plate, increasing safety and protecting the workpiece from any possible damage.

The DKP181Z features AWS* functionality and connects wirelessly to compatible Bluetooth vacuum cleaners for on-demand dust removal, providing a cleaner, safer work environment.

• High power motor allows maximum cutting depth of 3mm
• Auto-start wireless system (AWS) for on-demand dust removal*
• 12,000rpm no-load speed with automatic torque drive performance
• Left or right chip removal
• Electric brakes and feet on the base plate protect workpieces from damage

规格

• Planing width: 82mm
• maximum. Planing depth: 3mm
• Overlap/folding: 25mm
• Noise: 84db(A)
• Vibration: 5.0m/s²

*AWS receiver sold separately

MAKITA 18V Brushless Starlock Max Multi-Tool Skin DTM52ZX3

The Makita 18V LXT Brushless Multi-Tool (DTM52) delivers more power and less vibration than ever before. The DTM52 features advanced features such as AVT, which reduces vibration and reduces noise. The new STARLOCK Max accessory mounting system offers improved performance, perfect for cutting, sanding, scraping, removing grout and more.

The DTM52's vibration angle has been improved to 3.6, resulting in increased cutting efficiency and designed for faster, more aggressive cutting and sanding. Variable speed control knob (6,000 20,000 OPM) and soft start feature give users more control to match speed to application.

The DTM52 is designed for a range of applications including cutting, sanding, scraping, grout removal and more. It's ideal for builders, carpenters, plumbers, wood floor installers and general trades looking for a best-in-class cordless multi-tool.

• Starlock accessory mounting system is designed for heavy-duty applications
• Anti-Vibration Technology (AVT) with balancing system significantly reduces vibrations
• Improve cutting efficiency by improving the swing angle of 3.6 degrees to achieve fast cutting
• Variable speed control knob to adjust speed to suit application
• Tool-free lever locking system allows for quick attachment and removal of accessories
• Includes bow plunge saw blade

Specification

• Swing angle left and right: 1.8 degrees (total 3.6 degrees)
• Oscillation per minute: 10,000 - 20,000opm
• Vibration: 2.5 m/s²
• Noise: 69dB(A)
• Voltage: 18V
• Tool-free accessory replacement: Yes
• Starlock Compatible: Yes
• Starlock Max Compatible: Yes

SEE 18V LED flashlight skin DML808

The 18V LXT® Lithium-Ion LED Flashlight (Model DML808) provides bright illumination, versatility and convenience. High brightness single LED flashlight provides 200 lumens of light and a sharp round spotlight. Features include beam adjustment from spot to flood, and a 12-position swivel head with active stops from 60° to 110°. When used with the fast-charging 18V LXT® Lithium-Ion 5.0Ah battery (sold separately), the flashlight provides up to 23 hours of continuous lighting on a single charge. The flashlight can be powered by Makita 18V LXT and 18V LXT compact lithium-ion batteries.

New features include an aluminum flashlight head and metal hook for improved durability. The flashlight features a slim and compact design, measuring 11-3/4 inches long and weighing only 2.5 pounds. (Comes with 18V LXT® battery, sold separately).

It is part of Makita's expanded 18V Li-ion system, the world's largest cordless tool system powered by an 18V Li-ion slide-in battery. Makita 18V lithium-ion batteries have the fastest charge times in their class, so they can spend more time working and less on the charger.

• High brightness single LED flashlight delivers 200 lumens
• Simply turn the focus ring to adjust the beam from spot to flood
• 12-position rotating flashlight head with 60° - 110° stop
• Aluminum flashlight head design improves durability
• Metal hooks are convenient and durable on the job site
• Faceted reflectors control the direction and spread of light
• Compact and ergonomic design, only 11-3/4" long
• LED and provides a sharp round spotlight
• Weighs only 2.5 lbs. With battery (battery and charger not included)
• Rubber soft grip increases working comfort
• An ideal addition to any toolbox or workshop
• 3 year limited warranty
• Batteries and chargers sold separately
• Use only original Makita batteries and chargers

Makita 18V 5.0Ah lithium-ion battery BL1850B-L

• Integrated LED battery level indicator allows user to monitor battery level
• Up to 33% longer run time per charge compared to BL1830
• 40 minutes quick charge
• Batteries provide stable power and runtime in extreme temperatures, even in winter (-20°C)
• Impact-resistant outer shell and shock-absorbing lining are designed to protect the battery
• Sixteen contact terminals maintain a constant connection to the tool, helping to prevent power loss or fluctuations, even in high-vibration applications
• The battery is resistant to self-discharge and can still be used even after long-term storage
• Sensitive electronics are protected by a thick gelcoat to prevent dust and moisture damage
• Star protection computer control - including overload protection, over-discharge protection and overheating protection
• The battery and tool communicate to cut off power when current draw is abnormally high, thus preventing the tool and battery from overloading
• If the battery reaches a certain heat, it will cut power to the tool to prevent the tool and battery from overheating

MAKITA 18V lithium-ion dual-port fast battery charger DC18RD 1969360

• Fast charging - Charges 2 3.0Ah Li-ion batteries simultaneously in just 22 minutes
• Built-in CPU - collects information from the battery's memory chip to determine the best charging method
• Forced air cooling fan - cools the battery to minimize charging time
• LED charging display
• Sound reminder when fully charged. The USB port provides 1.5A output, which can charge smartphones, tablets, etc.

MAKITA canvas tool bag set LXT418 & LXT423 1999369

• Ideal for transporting and storing your favorite Makita tools
• Weather resistance
• Durable nylon Cordura construction
• Interior pocket features straps to retain tools during transport
• External pockets store accessories and more